Plastic Impact Sprinkler Price

KSh750.00KSh1,800.00

Plastic Impact Sprinkler

An Impact Sprinkler is a type of irrigation sprinkler in which the sprinkler head, driven in a circular motion by the force of the outgoing water, pivots on a bearing on top of its threaded attachment nut.

Quantity
SKU: 509a Category: Tags: ,

Description

Grekkon Limited has plastic impact sprinkler price in Kenya is tailored for crop farmers, and lawn gardeners. Our plastic impact sprinklers are overhead irrigation accessories that water crop under moderate to high pressure. The moderate pressure power force is by gravity, and the higher pressure is from a water pump. These plastic impact sprinklers in Kenya are in various inlet pipe diameter sizes as; 1/2 inch, 3/4 inch, and 1 inch.

Other sprinkler types by Grekkon Limited

1. Rain gun sprinklers 2. Pop up sprinklers 3. Butterfly sprinklers

4. Meganet sprinklers
  Impact sprinklers

Plastic Impact Sprinkler Price

Impact Sprinkler Head Price in KES
1/2″KES 250
3/4″KES 450
1″KES 950

How to use plastic impact sprinklers

During irrigation, consider crops that are not susceptible to foliage fungal infections as a result of wetness on their leaves. Drip irrigate for tomato, peppers, potato, chili, and other solanaceous crops. This is to avoid excess moisture on their leaves because they quickly succumb to leaf fungal infections as a result of wetness. Certain bean types, snow-peas, and mangetout too will easily get leaf fungal infections under sprinklers. Common food crops such as; onion, cabbage, grass, and legume pastures. Others are; garlic, carrot, maize, lettuce, broccoli, cauliflower, watermelon, orchards, forestry crops. Many others will be fine under this irrigation system

1. How do plastic impact sprinklers work?

The sprinkler head is driven in a circular motion by the force of the outgoing water. This head is pivoted on a bearing on top of its threaded attachment nut

2. Which is the best plastic impact sprinkler in Kenya?

Brass metallic impact sprinklers are the best because they last longer, do not rust, and have fewer mechanical challenges as compared to plastic ones

3. What pump size do I need for a sprinkler system?

Check the head of your sprinkler and the flow output rate, then select a pump that has 3 times the head/ lift, and the total flow rate of the sprinklers

4. Why do plastic impact sprinklers get stuck?

Impact sprinklers not rotating is as a result of the entry of foreign particles in the water. This particles clog the sprinkler at the neck. Low water pressure such that there isn’t enough pressure created to move the head or too much pressure which jams the sprinkler
 
Plastic impact sprinklers by Grekkon Limited

4-way nozzle plastic impact sprinkler

5. How long should you run an plastic impact sprinkler?

Run it for 40 minutes at a time, 3 times a week during normal days. When it is hot and ry, double the watering time

6. How long do plastic impact sprinklers last?

Different parts of your sprinkler system will be replaced in it’s life. Expect the average sprinkler system to last for over 15 years

7. Why do impact sprinklers stop working?

It could be as a result of blockage by debris in the water, or if the tension on the spring is lost. Unclog the system to allow for water passage into the sprinkler. For the spring, this will be replaced

8. Do impact sprinklers water evenly?

Yes and no. Yes if is is well adjusted to spray, and no if it is left to eject a water jet that leaves a ‘blind’ spot in the middle

9. Do impact sprinklers need to overlap?

Yes they do. To achieve a uniform water application, this must be done  

A sprinkler overlap design

10. What is the maximum distance between sprinklers?

This distance will not exceed 3.5M

Plastic Impact Sprinkler Price

Sprinkler adjustment

Adjustments are done for amount of water, distance and pattern of water spray. To adjust for the volume of water, increase or decrease the water flow from the source. For distance adjust the diffuser screw to increase or decrease it. Alternatively, adjust the deflector shield. The trip pin collar adjustment affects the watering pattern. Here, the grower chooses to spray from 10 degrees through 360 degrees

Plastic Impact Sprinkler Price

Summary

Beyond these sizes, we supply the more powerful raingun sprinklers. The nozzle diameter size of the farm sprinklers is 0.4mm, 0.6mm, and 0.8mm respectively for 1/2 inch, 3/4 inch, and 1inch.

Because of their short irrigation diameter and low water discharge volume, plastic impact sprinklers are designed for small farms and short crops. During installation, plastic PVC and HDPE, canvas delivery or metallic GI pipes drive water to the sprinkler from a source. The choice between a plastic one and a metallic sprinkler is on the farmer’s budget. The latter has a longer usable lifespan, is susceptible to damage but costs more. Plastic versions are easier to handle, carry and operate. They cost less but are easily damaged and so have a shorter usable lifespan

Plastic Impact Sprinkler Price

Irrigation Water Sprinklers for Sale

As a sprinkler distributor, irrigation Water sprinklers for sale are available in our Athi River, Nairobi, Kisumu, Eldoret, Nyeri, and Nyahururu outlets

Grekkon Limited’s irrigation technicians and agronomists provide guidance on system use and crop selection for this irrigation system

Additional information

Plastic Impact Sprinkler Type

Half Inch(1/2"), Three Quarter Inch(3/4"), One Inch(1")

Reviews

There are no reviews yet.

Be the first to review “Plastic Impact Sprinkler Price”

Your email address will not be published. Required fields are marked *